Frequently asked questions
What is a well flow test?
A well flow test measures well productivity — how much water the well and pump can produce. Super Flow Joe calls this a peak demand test (brief source and pump system production). It establishes approximate pump capacity and identifies basic water availability, and Super Flow Joe runs it as a 2-hour flow test or a 4-hour flow test. Buyers, realtors, and lenders often ask for one of these before a home sale. Ask which length they want, then request a quote or call 208-500-9930.
What does a well system inspection include?
The well system inspection covers seven checks: controls and motor diagnostic, pressure switch condition, electrical code / safety assessment, mechanical component assessment, pressure tank condition, piping code compliance, and pressure gauge / pressure relief condition.
Do you test well water quality?
Yes. Super Flow Joe does potability (water quality) testing as well as flow testing. Laboratory report turnaround times vary with laboratories. The laboratory name is not published here.
How soon will I get the inspection and report?
The published window is a typical 48-hour response window for the inspection and report. Laboratory reports are separate: turnaround times vary with laboratories.
Where does Super Flow Joe test wells?
Super Flow Joe Well Testing conducts well inspections in all of North Idaho and Eastern Washington: Coeur d'Alene, Post Falls, Hayden, Rathdrum, Athol, Spirit Lake, Sagle, Sandpoint, Bonners Ferry, Priest River, Kellogg, Pinehurst, St. Maries, Plummer, Spokane, Spokane Valley, Deer Park, Newport and surrounding areas. Call 208-500-9930 if your town is nearby and not named.
How do I schedule a well test?
There is no public booking calendar. Request a quote on this site (name, email, phone, property address, town, service needed, preferred dates, and a message) or call 208-500-9930. Joe Hembrook, inspector and owner, follows up by phone or email.
Should I order the 2-hour or the 4-hour flow test?
Super Flow Joe offers two peak demand flow tests: a 2-hour flow test and a 4-hour flow test. Which one you need is usually set by the buyer, realtor, or lender, so ask them before you request a quote. Pricing varies by property and test. Request a free quote or call 208-500-9930.
How much does a well test cost?
Pricing varies by property and test. Request a free quote or call 208-500-9930. Tell us about the property and which test you need (the well system inspection, the 2-hour or 4-hour flow test, water quality testing, or a combination), and Joe will put the cost in your quote.
What gallons per minute (gpm) is acceptable for a home loan?
Each lender and loan program sets its own requirement, so the best first step is to ask your lender or realtor exactly what they need. Joe then runs the test they ask for, either the 2-hour or the 4-hour peak demand flow test, and reports what the well and pump actually produced.
How long are you on site?
It depends on the test. The flow test itself runs for 2 hours or 4 hours, depending on which one you order, and Joe also needs time before and after to set up, check the pump system, and pack up.
How should I prepare the property before a well test?
A few simple things help the day go smoothly: make sure the power to the well is on; clear a path to the wellhead and make sure the pressure tank and controls are reachable (often in a garage, basement, crawlspace, or well house); secure pets; and let us know about anything unusual, like a buried wellhead, a locked well house, or a gate code.
For a test, call 208-500-9930 or request a quote.
Related: well flow test for a home sale · water quality testing · well system inspection
Ready to schedule a well test?
Request a quote or call Joe Hembrook. There is no public booking calendar.